ANYANG GEMCO ENERGY MACHINERY CO.,LTD
 

Biofuel Machine

Oil Press WoodPellet Mill Biomass Briquette Plant  
 
 

Cooling /Sieving /Bagging system

After the pelletizing process, the temperature of the wood pellet is about 60-80 degree, and the moisture content of the wood pellet is
about 15%, so we need use Cooler to reduce about 3-4% moisture, such this the wood pellet is easy to store.

After cooling, the wood pellet will not directly enter into the fuel process, avoiding the wood pellet affected with damp. The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine to you. 


 

Cooler:To cool pellets to temperatures of approx. 20 degrees C above the cooling air temperature, constructed on the fluidized bed principle.
The cooler ventilator blows the cooling air through a feed pipe into the air distributor box and through a swirling base into the fluidized bed. This causes the pellets to be whirled up, cooled and conveyed to the pellet discharger. The side walls, which come into contact with the product, and the swirling base are manufactured in stainless steel. The necessary switching devices are installed in the switch cabinet for the pelletizer


 
Dust filter: Special Design of Jet-blow device, Frame Structure, Disassemble and Maintain Easy.
Square Meter Filter Capacity for per hop-pocket, Low Occupied Area.
Our Series include TBLMY4, 9, 12, 15, 21, 28, 40, 5 more>>
Pellet Packing


Packing machinery:The special aseismic equipment can guarantee precise calculation, fast speed and stable work under bad conditions. It can be adjusted outside which is very convenient to maintain. more>>



Conveying equipment
play an important roles in transporting material from one mill to another, Some are
designed to operate horizontally, some on a slope, others elevate the material vertically to a different level of the building.
The requirement for elevators and conveyors will depend on how automated the mill is to be and how its plant is laid out.The utmost use of such equipment is made in the modern pellet mill (often using pneumatic systems) to minimize labour needs and to maximise the use of land by building multi-storey, rather than horizontally arranged plants
more>>

 

 
Contact Christine with MSN
(Oil Press)
Contact Amy with MSN
(Wood Pellet Mill)
Contact Kelly with MSN
(Biomass Briquette Plant )


Link


Wall & Roof Panel Roll Forming Machine

Machine Tools

Wood Pellet Line

.Feed Machinery

7.Ecplaza

8.Biofuels


 

 



 

 

ANYANG GEMCO ENERGY MACHINERY CO.,LTD   ISO 9001:2000
TEL: 0086 372 3385666 Fax:0086 372 3385657  EMAIL: info@woodpelletline